|
Set of 8 Dillon Locator Pin Tabs. 3D printed. Pin hole is tight so the pin and the tab will not separate. If you buy two sets from us we will send you a third set free. We now include a short tab for the 1050 and a station 3 pin tab for the 650. Total of 8 Tabs for every order. Please read the information below.
NOTES***
Will work for Dillon XL650, 550,1050
The long/standard size will not work with the Dillon 1050 Powder Station so we are including 1 short versions.
Also we have gotten some feedback that there might be a small clearance issue on the 650 only at the bullet seating station IF YOU ARE using the Dillon bullet try. We are including 1 short version.
Station 3 on the XL 650 requires a special shaped tab that we include in every order.
All orders will be shipped standard us mail with a postage stamp. We can ship it priority at an additional charge of $3 dollars.
|
12 Reviews Hide Reviews Show Reviews
-
Dillon locator pin tabs
These are great additions to my Dillon 550. My big old fingers kept dropping the pins when I wanted to verify my powder loads. This doesn't happen any more. These tabs make checking my powder loads a snap.
-
Dillon locator pin tabs
These are great additions to my Dillon 550. My big old fingers kept dropping the pins when I wanted to verify my powder loads. This doesn't happen any more. These tabs make checking my powder loads a snap.
-
Dillon locator pin tabs
These are great additions to my Dillon 550. My big old fingers kept dropping the pins when I wanted to verify my powder loads. This doesn't happen any more. These tabs make checking my powder loads a snap.
-
Locater pin tabs
These things are great, especially for 44's and 45's, because the locator pins are so small. I moved my bullet tray out one inch using metal sleeve spacers to accommodate the tab at station 4 (the bullet setting die) and it's fabulous. They are easy to grab when you need to remove a locator pin for one reason or another. Good stuff! Highly recommended.
-
Locater pin tabs
These things are great, especially for 44's and 45's, because the locator pins are so small. I moved my bullet tray out one inch using metal sleeve spacers to accommodate the tab at station 4 (the bullet setting die) and it's fabulous. They are easy to grab when you need to remove a locator pin for one reason or another. Good stuff! Highly recommended.
-
Locater pin tabs
These things are great, especially for 44's and 45's, because the locator pins are so small. I moved my bullet tray out one inch using metal sleeve spacers to accommodate the tab at station 4 (the bullet setting die) and it's fabulous. They are easy to grab when you need to remove a locator pin for one reason or another. Good stuff! Highly recommended.
-
Locater pin tabs
These things are great, especially for 44's and 45's, because the locator pins are so small. I moved my bullet tray out one inch using metal sleeve spacers to accommodate the tab at station 4 (the bullet setting die) and it's fabulous. They are easy to grab when you need to remove a locator pin for one reason or another. Good stuff! Highly recommended.
-
Locater pin tabs
These things are great, especially for 44's and 45's, because the locator pins are so small. I moved my bullet tray out one inch using metal sleeve spacers to accommodate the tab at station 4 (the bullet setting die) and it's fabulous. They are easy to grab when you need to remove a locator pin for one reason or another. Good stuff! Highly recommended.
-
Locater pin tabs
These things are great, especially for 44's and 45's, because the locator pins are so small. I moved my bullet tray out one inch using metal sleeve spacers to accommodate the tab at station 4 (the bullet setting die) and it's fabulous. They are easy to grab when you need to remove a locator pin for one reason or another. Good stuff! Highly recommended.
